(After 2005, Students supervised are underlined)

Vascular Mechanics

  1. Zhao, S., Gu, L.X., and Froemming, S.R., 2012. On the importance of modeling stent procedure for predicting arterial mechanics, ASME Journal of Biomechanical Engineering. 134, 121005 (6 pages). DOI: 10.1115/1.4023094.
  2. Zhao S., Gu L.X., and Froemming, S.R., 2012. Effects of Arterial Strain and Stress in the Prediction of Restenosis Risk: Computer modeling of stent trials. Biomedical Engineering Letters, 2(3), 158-163. DOI: 10.1007/s13534-012-0067-6
  3. Steinert B.D., Zhao S., Gu L.X., 2012. Monitoring the Wall Mechanics during Stent Deployment in a Vessel, Journal of Visualized Experiments, 63, e3945, DOI: 10.3791/3945
  4. Zhao S., Gu, L.X., and Froemming, S.R., 2012. Performance of Self-expanding Nitinol Stent in a Curved Artery: Impact of stent length and deployment orientation. ASME Journal of Biomechanical Engineering.134, 071007 (6 pages). DOI: 10.1115/1.4007095
  5. Gu, L.X., Zhao, S., and Froemming, S.R., 2012. Arterial Wall Mechanics and Clinical Implications after Coronary Stenting: Comparisons of Three Stent Designs, International Journal of Applied Mechanics, 4(2). DOI: 10.1142/S1758825112500135
  6. Zhao S., Gu, L.X., and Froemming, S.R., 2012. Finite Element Analysis of the Implantation of a Self-Expanding Stent: Impact of Lesion Calcification. ASME Journal of Medical Devices, 6(2),021001 (6 pages). DOI: 10.1115/1.4006357
  7. Zhao S., Liu, C., and Gu, L.X., 2012. The Impact of Wire Stent Fabrication Technique on the Performance of Stent Placement. ASME Journal of Medical Devices 6(1), 011007 (4 pages) DOI: 10.1115/1.4005788
  8. Gu, L.X.,Kasavajhala, A.R.M., Lang, H.L., and Hammel, J.M., 2012. Experimental and Numerical investigation of Vascular Suture Closure. Biomedical Engineering Letters, 2(1), 46-51, DOI: 10.1007/s13534-012-0046-y
  9. Zhao, S., Li, W., and Gu, L.X., 2012. Biomechanical Prediction of Abdominal Aortic Aneurysm Rupture Risk: Sensitivity Analysis, J of Biomedical Science and Engineering, 5, 664-671. DOI: 10.4236/jbise.2012.511083
  10. Zhao S., Gu L.X., and Froemming, S.R., 2011. Assessment of Shape Memory Alloy stent Deployment in a Stenosed Artery. Biomedical Engineering Letters, 1(4), 226-231, DOI: 10.1007/s13534-011-0036-5.
  11. Gu, L.X., Zhao, S., Muttyam A.K., and Hammel, J.M., 2010. The Relation between the Arterial Stress and Restenosis Rate after Coronary Stenting. ASME Journal of Medical Devices 4(3), 031005(7 pages). DOI:10.1115/1.4002238       
  12. Gu, L.X., Kumar, A.V., Santra, S., and Mericle, R.A., 2005. Finite Element Analysis of the Covered Microstent. Journal of Biomechanics, 38(6), 1221-1227. DOI:10.1016/j.jbiomech.2004.06.008

Traumatic Brian Injury

  1. Gu, L.X., Chafi, M.S., Ganpule S., and Chandra, N., 2012. The Influence of Heterogeneous Meninges on the Brain Mechanics under Primary Blast Loading. Composites Part B: Engineering, 43(8), 3160-3166. DOI: 10.1016/j.compositesb.2012.04.014
  2. Ganpule S., Gu, L.X., Alai, A., and Chandra, N., 2012. Role of Helmet in the Mechanics of Shock Wave Propagation under Blast Loading Conditions. Computer Methods in Biomechanics and Biomedical Engineering, 15(11), 1233-1244. DOI:10.1080/10255842.2011.597353
  3. Chafi, M.S.,Ganpule S.,Gu, L.X., and Chandra, N., 2011. Dynamic Response of Brain Subjected to Blast Loadings: Influence of Frequency Ranges. International Journal of Applied Mechanics (IJAM), 3(4), 803-823. DOI: 10.1142/S175882511100124X

Composites

  1. Hua, Y., and Gu, L.X., 2013. Prediction of the thermal-mechanical behavior of particle-reinforced metal matrix composites, Composites Part B: Engineering. 45(1), 1464-1470. DOI: 10.1016/j.compositesb.2012.09.056
  2. Hua, Y., Kasavajhala, A.R.M., and Gu, L.X., 2013. Elastic-Plastic Analysis and Strength Evaluation of Adhesive Joints in Wind Turbine Blades. Composites Part B: Engineering, 44, 650-656. DOI: 10.1016/j.compositesb.2012.02.001
  3. Hua, Y., Gu, L.X., and Trogdon M.(Undergraduate), 2012. Three Dimensional Modeling of Carbon/Epoxy to Titanium Single-lap Joints with Variable Adhesive Recess Length. International Journal of Adhesion and Adhesives (IJAA), 38, 25-30. DOI: 10.1016/j.ijadhadh.2012.06.003
  4. Kasavajhala, A.R.M., and Gu, L.X., 2011. Fracture Analysis of Kevlar-49/Epoxy and E-Glass/Epoxy Doublers for Reinforcement of Cracked Aluminum Plates. Composite Structures, 93(8), 2090-2095. DOI:10.1016/j.compstruct.2011.02.012  
  5. Gu, L.X., Kasavajhala, A.R.M., and Zhao, S., 2011. Finite Element Analysis of Cracks in Aging Aircraft Structures with Bonded Composite-Patch Repairs. Composites Part B: Engineering, 42(3), 505-510. DOI:10.1016/j.compositesb.2010.11.014     

Energy and Algorithm

  1. Wang, S.M., Shen, Z.G., and Gu, L.X., 2012. The impact of roof pitch and ceiling insulation on cooling load of naturally-ventilated attics, Energies, 5(7), 2178-2196; DOI:10.3390/en5072178
  2. Wang,S.M., Shen, Z.G., and Gu, L.X., 2012. Numerical Simulation of Buoyancy-driven Turbulent Ventilation in Attic Space under Winter Conditions, Energy and Buildings, 47, 360-368. DOI:10.1016/j.enbuild.2011.12.012
  3. Kumar, A.V., Burla, R., Padmanabhan, S., and Gu, L.X., 2008. Finite Element Analysis using Nonconforming Mesh. ASME Journal of Computing and Information Science in Engineering, 8(3), 031005(11 pages). DOI:10.1115/1.2956990